Tickr Spider Fitting Supplier in Bhubaneswar — SS 304 Structural Glass Fittings, 7-Year Warranty

TICKR supplies Bhubaneswar’s glass facade and curtain wall sector with SS 304 structural spider fittings — the point-fixed glazing hardware used to create glass facades, structural glass walls, and full-height glass feature installations in corporate buildings, malls, and institutional projects. Bhubaneswar’s skyline is transforming with glass-facade IT campuses, government buildings, and commercial towers, and the structural integrity of these glass installations depends entirely on the quality of the spider fittings holding the glass panels in place. Tickr’s 14-model spider fitting range is the B2B specification standard for Bhubaneswar glass contractors, facade engineers, and architects.

TICKR Spider Fitting Range — 14 Models for Bhubaneswar

Spider fittings are structural components. Their SS 304 grade, casting quality, thread engagement, and rotational float tolerance directly determine whether a glass facade system meets engineering safety standards. Tickr’s spider fittings are precision-cast in SS 304 stainless steel with polished finish, available in 1-way, 2-way, 3-way, and 4-way arm configurations for all point-fixed glazing applications.

• TCH-8524 — 1-way spider fitting (single arm), SS 304, for glass edge fixings and glass panel end points
• TCH-8525 — 2-way spider fitting (two-arm, 180°), SS 304, for mid-row glass panel connections in horizontal glass strips
• TCH-8526 — 2-way spider fitting (two-arm, 90°), SS 304, for corner glass panel fixings at curtain wall junctions
• TCH-8527 — 3-way spider fitting (T-configuration), SS 304, for glass panel connections at facade T-intersections
• TCH-8528 — 4-way spider fitting (cross configuration), SS 304, the standard structural fitting for centre-of-glass-panel point fixing in full-height glass facades
• TCH-8529 — 4-way spider fitting (swivel arm), SS 304, with adjustable arm angle for non-orthogonal glass facade geometries
• TCH-8537 — Heavy-duty 4-way spider fitting, SS 304, for large glass panels in high-wind-load facade applications
• TCH-8539 — 4-way spider fitting with extended arms, SS 304, for wider glass panel spacing on open glass facade systems
• TCH-8540 — 4-way spider fitting with flush cap, SS 304, for minimal-hardware-visible glass facade aesthetics
• TCH-8588 — Stainless spider bolt fitting, SS 304, the anchor bolt component connecting spider arm to structural support rod

Complete your specification with matching 14-model range — including 1-way, 2-way (90° and 180°), T-configuration, and 4-way swivel variants. Contact +91-9855225874 or sales@tickrindia.com for a project-specific spider fitting schedule and B2B pricing.

Where Tickr Spider Fittings Are Used in Bhubaneswar

Bhubaneswar’s architectural transformation creates high demand for structural glass systems that require spider fittings:

• IT Campus Glass Facades: Infocity Bhubaneswar’s newer buildings feature full-height glass curtain wall facades where Tickr’s 4-way spider fittings provide the structural point-fixing system holding large glass panels to the building’s structural frame.
• Shopping Malls and Retail Atria: Esplanade One and other large-format retail spaces use full-height glass feature walls in atriums and food court areas where Tickr’s swivel and extended-arm spider fittings accommodate the curved or angled glass geometry.
• Government and Civic Buildings: New Odisha government secretariat buildings and Smart City project civic centres are incorporating glass facades as a contemporary architectural language. Tickr’s certified spider fittings meet the structural specification requirements for government project procurement.
• Hotel Lobbies and Feature Walls: Premium hotels in Bhubaneswar use structural glass feature walls and full-height glazed lobby frontages where Tickr’s flush-cap and polished-finish spider fittings provide the minimal-hardware aesthetic demanded by architects.
• Convention and Events Centres: The new Convention Centre near Bhubaneswar Airport uses spider fittings for its signature glass facade, showcasing the structural glass architecture now expected of Odisha’s landmark buildings.

Engineering Requirements for Bhubaneswar Glass Facades

Bhubaneswar is in Seismic Zone III and lies in a high-humidity subtropical climate zone. Facade systems in the city must account for thermal movement, seismic deflection, and wind load. Tickr’s swivel-arm spider fittings (TCH-8529) accommodate glass panel movement caused by thermal expansion without transferring stress to the glass — a critical engineering safety feature in Bhubaneswar’s climate conditions. The heavy-duty TCH-8537 is specified for high-wind-load facade panels in exposed locations.

For facade engineers preparing structural glass calculations for Bhubaneswar projects, Tickr can provide technical data sheets including fitting dimensions, load ratings, and material certification for SS 304 grade.

TICKR Warranty and Certification

Spider fittings are structural hardware — the consequences of failure are severe. Tickr’s 7-year warranty on all spider fittings reflects the manufacturing confidence behind SS 304 precision casting. TUV-SUD certification covers Tickr’s production standards. For Bhubaneswar architects and structural engineers who need to submit hardware specifications to project clients, Tickr’s documentation package — technical data sheets, material certification, warranty letter — is available on request.

Frequently Asked Questions — Tickr Spider Fitting Supplier in Bhubaneswar

What spider fitting configurations does Tickr supply for Bhubaneswar glass facades?

Tickr supplies 1-way, 2-way (90° and 180°), 3-way T-configuration, and 4-way cross spider fittings in SS 304. Swivel-arm, extended-arm, flush-cap, and heavy-duty variants are available for different facade geometry and load requirements.

What is the material grade of Tickr spider fittings?

All Tickr spider fittings are precision-cast in SS 304 stainless steel — the structural grade standard for glass facade hardware in India. TUV-SUD certification covers Tickr’s manufacturing quality standards.

Why does Bhubaneswar require swivel-arm spider fittings?

Bhubaneswar’s subtropical climate creates significant thermal movement in glass panels. Swivel-arm spider fittings (Tickr TCH-8529) accommodate this movement without transferring stress to the glass, preventing stress cracking — a critical engineering requirement for glass facades in Bhubaneswar’s climate zone.

Does Tickr provide a warranty on spider fittings in Bhubaneswar?

Yes. All Tickr spider fittings come with a 7-year manufacturer warranty. Technical data sheets and material certification are available for project specification submissions.

How do I order Tickr spider fittings for a Bhubaneswar facade project?

Email your project facade schedule (fitting types, quantities, glass panel dimensions) to sales@tickrindia.com or call +91-9855225874. Tickr will respond with a formal B2B quotation within one working day.