Tickr supplies glass door patch fittings to fabricators, architects, contractors and hardware dealers working across Hyderabad and the wider Telangana market. Patch fittings carry the load of a toughened glass door assembly at the top, bottom and connecting points, so specification accuracy matters more than price alone.
Patch fitting range supplied to Hyderabad
The following patch fitting references are stocked lines from the Tickr catalogue:
- TCH-001 Top Patch — top patch fitting for toughened glass door assemblies.
- TCH-002 Bottom Patch — bottom patch fitting, paired with the top patch on a standard door.
- TCH-8407 Bottom Lock Patch — heavy-duty bottom patch incorporating the lock housing.
- TCH-8411 Center Lock Strike Box — strike box for centre-lock door configurations.
- TCH-8406 Big L and TCH-8408 Small L — L-shaped stainless steel patch fittings for bottom corner fixing.
- TCH-8409 Over-panel — over-panel patch fitting used where a fixed panel sits above the door leaf.
- TCH-8415 / 640 Patch Wall-to-Glass Single Connector and TCH-8416 / 650 Glass-to-Glass Connecting — connector patches for wall-to-glass and glass-to-glass junctions.
- TCH-8403 Pivot Arm and TCH-8405 Top Pivot — pivot components for patch-fitted door sets.
- TCH-8401 Mini Floor Hinge — compact floor hinge for lighter patch-fitted assemblies.
- TCH-8404 Glass Door Stopper — door stopper for patch-fitted glass doors.
Who this is for in Hyderabad
Glass fabricators quoting commercial shopfronts and office partitions; architects and interior consultants specifying entrance hardware; and hardware dealers stocking patch fitting lines for local fabricators. Requirements typically differ by glass thickness and door weight, so the correct patch and pivot combination should be confirmed against the door schedule before ordering.
Specifying patch fittings correctly
Three details determine the right selection: the glass thickness of the door leaf, the leaf weight and width, and whether the assembly uses a floor spring or a pivot arrangement. Over-panel and connector patches are added where fixed glazing sits above or beside the opening leaf. Getting the pivot and bottom patch pairing right at specification stage avoids rework on site.
Enquiries
For patch fitting requirements in Hyderabad, contact Tickr on +91-9855225874. Share the door schedule — glass thickness, leaf size and weight, and whether the design uses a floor spring or pivot — and the matching patch fitting references can be confirmed against the requirement.